This step-by-step tutorial will show you how to convert between all popular video formats, transform between audios, capture audio or picture from video, as well as edit video. After downloading and installing Full Video Converter, follow the steps below to accomplish video conversion tasks.

• 1.Installation Guide
• 2.Files conversion
• 3.Clip Video Segment
• 4.Crop area size
• 5.Add effects
• 6.Create video watermark
• 7.Add your own subtitle to output video
• 8.Register
• 9.FAQ

1.Installation Guide

Once you have finished downloading from the website, either click Run or locate and launch the downloaded file named full_video_converter.exe to start the installation. Follow the instructions on the Full Video Converter Setup Wizard screen; the brief steps are as follows:

1. Click Next on the Welcome to the Full Video Converter Setup Wizard.
2. On the License Agreement screen, read the EULA, choose the option I accept the agreement and click Next.
3. On the Select Destination Location screen, select the location where Full Video Converter is going to be installed and click Next.
4. On the Select Additional Tasks screen, click Next if needed, otherwise just leave the default selections.
5. Click Install on the Ready to Install screen if the setup summary is showing the expected description; otherwise, click Back if you want to review or change any settings.
6. Click Finish to complete the installation while launching Full Video Converter.

 

2.Files conversion
The software provides an easy and quick way to convert video and audio files.

1. Add files
   Click Add File(s) button on the toolbar, select video or audio files you want to convert in the dialog box that opens, and add them to the file list.
2. Select output format
   Choose one or more files in the file list, and open Profile drop-down list, then select an output format for selected files.
   Tip: To adjust the output settings, click Edit button next to Profile drop-down list, and set the parameters of output format in the Conversion Setting dialog box that opens.
3. Set output folder
   Click Browse button in setting panel, select a destination folder in the dialog box that opens, and click OK.
   Tip:Before start to convert video, you can clip video segment, crop area size, add effects, and create video watermark to colorize your output file.
4. Convert file
   After finishing the above settings, check the files needed to convert in the file list, and click Convert Checked Item(s) button on the toolbar to start converting the files. You can view the conversion progress from the progress bar at the bottom of the window.

Tip: You can click Pause Checked Item(s) button to pause the converting process and Stop Checked Item(s) button to cancel the process as required.

 

3.Trim Video Segment
The software provides video/audio clipping function, which allows you to choose the segments you like from the source, and add them to the file list for converting.

1. Select a video/audio file in the file list, click Trim/Clip button on the toolbar and choose Trim option to open Trim window.
2. Drag the slider bar to preview the selected file.
3. When it comes to the very start point you want, click Set Start Point(<<) button to set it as start point. And when it comes to the end point you want, click Set End Point(>>) button to set it as end point.
   
4. Then click OK button to return to the main interface.

 

 

4.Crop area size
Select the file you want to edit from the file list, and click Crop button on the toolbar and choose Crop option to open Crop window.

1. Check Enable Crop radio button.
2. Set Customized: Click the up and down arrow to adjust the height and width of the crop area. If you check Keep Aspect Ratio check box, the height and width will be changed proportionally.

Tips:

1. Click Disabled check button, to restore the default settings.
2. Adjust crop area manually: drag the central handle and surrounding handles in the preview window to adjust the crop area.

 

 

5.Add effects
Select the file you want to edit from the file list, and click Effect button on the toolbar and choose Effect option to open Effect window

1. Set Brightness: click and drag brightness control slider or enter a value in the Brightness textbox to set the brightness of the video.
2. Set Contrast: click and drag contrast control slider or enter a value in the Contrast textbox to set the contrast of the video.
3. Set Saturation: click and drag saturation control slider or enter a value in the Saturation textbox to set the saturation of the video.

Tip: Click Reset button, to restore the default settings.

 

 

 

6.Create video watermark
Select the file you want to edit from the file list, and click Add Watermark button on the toolbar and choose Watermark option to open Watermark window.

1. Click Browse(...) button, and select a picture or video for the watermark from the windows that opens.
2. Then adjust the watermark options as following:
   Set watermark Transparence: drag watermark transparence control slider to set the transparence of the watermark, or enter a number to set watermark transparence in the Transparence textbox.
   Set watermark Vertical Position: drag watermark vertical control slider to set the vertical position of the watermark, or enter a number to set watermark vertical position in the Vertical Position textbox.
   Set watermark Horizontal Position: drag watermark horizontal control slider to set the horizontal position of the watermark, or enter a number to set watermark horizontal position in the Horizontal Position textbox.
   

Tips:

1. Click Reset button, to restore the default settings.

 

 

7.Add your own subtitle to output video
Select the file you want to edit from the file list, and click Add Subtitle button on the toolbar and choose Subtitle option to open Subtitle window.

1. Click Browse(...) button, and select a file named suffix by ".srt"".
2. Then adjust the watermark options as following:
   Set watermark Vertical Position: drag watermark vertical control slider to set the vertical position of the watermark, or enter a number to set watermark vertical position in the Vertical Position textbox.
   Set watermark Horizontal Position: drag watermark horizontal control slider to set the horizontal position of the watermark, or enter a number to set watermark horizontal position in the Horizontal Position textbox.
   

Tips:

1. Click Reset button, to restore the default settings.

 

 

8.Register

The unregistered version of Full Video Converter can only convert only 3 minutes of each video file. To unlock the limitation of unregistered version, you can click on the Register button on the top right of the interface to register it and enjoy the excellent experience Full Video Converter provides.